轻型高强Al-Si/SiC复合材料反射镜的制备与性能

文章采用反应烧结工艺制备 Si/SiC 材料,然后通过真空扩散渗铝工艺制备了 Al-Si/SiC 复合材料。通过精确调控浸渗合金的铝浓度使制备的Al-Si/SiC复合材料具有可控的热膨胀系数,利用该工艺制备出热膨胀系数连续可调（4.6×10-6K-1~8.7×10-6K-1,0~40℃）的 Al-Si/SiC 复合材料,其力学性能优异,经检测密度为2.86g/cm3,弹性模量为236GPa,断裂韧性为6.1MPa＆#183;m1/2,可采用线切割、铣磨、钻孔、攻丝等手段加工,相比SiC陶瓷材料更易于高精度机械加工。扫描电子显微镜分析表明,制备的Al-Si/SiC复合材料均匀、致密,光学抛光后表面粗糙度均方根值达到1.017 nm。各项测试数据表明, Al-Si/SiC复合材料作为反射镜可以满足空间光学的应用。     

Investigation on surface roughness,residual stress and fatigue property of milling in-situ TiB2/7050Al metal matrix composites

For higher efficiency and precision manufacturing, more and more attentions are focused on the surface roughness and residual stress of machined parts to obtain a good fatigue life. At present, the in-situ TiB₂/7050Al metal matrix composites are widely researched due to its attractive properties such as low density, good wear resistance and improved strength. It is of great significance to investigate the machined surface roughness, residual stress and fatigue life for higher efficiency and precision manufacturing of this new kind material. In this study, the surface roughness including two-dimensional and three-dimensional roughness, residual stress and fatigue life of milling in-situ TiB₂/7050Al metal matrix composites were analyzed. It was found from comparative investigation that the three-dimensional surface roughness would be more appropriate to represent the machined surface profile of milling particle reinforced metal matrix composites. The cutting temperature played a great role on the residual stress. However, the effect of increasing cutting force could slow down the transformation from compressive stress to tensile stress under 270 °C. An exponential relationship between three-dimensional roughness and fatigue life was established and the main fracture mechanism was brittle fracture with observation of obvious shellfish veins, river pattern veins and wave shaped veins in fracture surface.     

Machining of SiC ceramic matrix composites: A review

Continuous fiber reinforced SiC ceramic matrix composites (FRCMCs-SiC) are currently the preferred material for hot section components, safety–critical components and braking components (in the aerospace, energy, transportation) with high value, and have triggered the demand for machining. However, the high brittleness, anisotropy, and heterogeneity of materials bring great challenges to machining, due to high mechanical and thermal loads, severe tool wear, and poor machining quality. With the increasing demand of FRCMCs-SiC parts, high-quality and high-efficient machining has become a hot issue. This review paper provides a detailed literature survey on the machining of FRCMCs-SiC. The material removal mechanism, defect form, and interfacial mechanical properties of FRCMCs-SiC were summarized. The machining processes of FRCMCs-SiC were introduced, and their respective advantages and disadvantages were compared. Given the low machinability (high hardness, high brittleness, anisotropy, and heterogeneity) of FRCMCs-SiC, preliminary experiments have proved that ultrasonic-assisted machining and laser-assisted machining have shown unique advantages in reducing force and tool wear, improving machining quality and machining efficiency. The machined surface integrity was discussed, the influence of process parameters on the machined surface quality was analyzed, and the machining defects of FRCMCs-SiC were summarized. But for FRCMCs-SiC, the existing quantitative evaluation of the machined surface integrity was weak and unsystematic.     

Performance analysis and application on Ti-6Al-4V of micro-forging system

Micro-forging (MF) is a novel surface modification technology which is capable of smoothening and strengthening the workpiece surface simultaneously. Based on analysis of the mechanism and energy conversion of micro-forging process, an electromagnetically driven micro-forging system is developed. To further grasp the kinetic characteristic of the equipment, a simulation model is established and its accuracy is verified. With the help of simulation and experimental results, we propose an input voltage optimization method, which drives the micro-forging head moving in a uniform and stable way. In this study, the influence of MF on surface integrity of Ti-6Al-4V (TC4) is firstly reported. Experimental results show that MF treatment reduces surface roughness (R_a) and increases micro-hardness by 48% and 11.8% at most, respectively. Besides, a compressive stress layer with an amplitude of −1000 MPa and a depth of 0.8 mm is observed. This study analyzes the performance and reveals the potential of micro-forging technology, which lays a solid foundation for expanding its application in TC4 surface modification.     

Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels

Creep feed profile grinding of the fir-tree blade root forms of single crystal nickel-based superalloy was conducted using microcrystalline alumina abrasive wheels in the present study. The grinding force and the surface quality in terms of surface topography, subsurface microstructure, microhardness and residual stress obtained under different grinding conditions were evaluated comparatively. Experimental results indicated that the grinding force was influenced significantly by the competing predominance between the grinding parameters and the cross-sectional root workpiece profile. In addition, the root workpiece surface, including the root peak and valley regions, was produced with the large difference in surface quality due to the nonuniform grinding loads along the root workpiece profile in normal section. Detailed results showed that the surface roughness, subsurface plastic deformation and work hardening level of the root valley region were higher by up to 25%, 20% and 7% in average than those obtained in the root peak region, respectively, in the current investigation. Finally, the superior parameters were recommended in the creep feed profile grinding of the fir-tree blade root forms. This study is helpful to provide industry guidance to optimize the machining process for the high-valued parts with complicated profiles.     

基于碟形砂轮磨齿的面齿轮包络残差研究

介绍了采用碟形砂轮磨削面齿轮的原理及过程,研究了齿廓包络和齿宽包络两种包络方式产生包络残差的机理.分别建立了两种加工方式下包络残差的计算模型和方法,并研究了所产生包络残差的特点.通过数值算例分析了包络过程中刀具周向进给角度、齿宽方向进给量以及碟形砂轮外径对齿面包络残差的影响规律.计算结果表明:齿宽包络比齿廓包络具有更高的效率.进行了以齿廓包络方式的面齿轮磨齿加工实验,当刀具周向进给角度分别取为2°,1°,0.5°及0.2°时,齿面表面粗糙度逐渐明显提高,齿面磨削加工印痕的数目和方向与包络仿真计算结果一致.初步证明根据包络残差计算结果选取合适的进给量参数,可以保证面齿轮磨齿加工的表面粗糙度水平并能提高加工效率.      

二维沟槽粗糙槽道内的湍流特性研究

采用激光多普勒测速技术对光滑和粗糙槽道湍流特性进行了实验研究。粗糙元为二维横向V型沟槽,沟槽深度为0.8mm,沟槽间距为6.4mm,对应的槽道半高度与沟槽深度比为12.5。基于中线时均速度和槽道半高度的流动雷诺数范围为2740～17400。实验测量了包括时均速度、湍流强度、雷诺切应力和速度脉动偏斜因子和平坦因子在内的湍流统计量,结果表明沟槽型粗糙度对湍流的影响不仅局限于边界层内区,而是延伸到整个边界层范围。粗糙壁面上的粗糙度函数随雷诺数的增大而增大,时均亏损速度也较光滑壁面高。沟槽抑制了内区的流向湍流强度,同时增大了外区的湍流强度。粗糙壁面上的雷诺切应力高于光滑壁面,且与湍流强度一样表现出对雷诺数的依赖性。尽管沟槽型粗糙度对流向平坦因子影响不大,但对流向偏斜因子有显著影响。     

GH4169高速铣削参数对表面粗糙度影响研究

采用正交试验法,使用整体硬质合金刀具进行GH4169高温合金的高速铣削试验,分析了各切削参数对表面粗糙度的影响规律,建立了表面粗糙度的预测模型,运用方差分析法,检验了模型的显著性。结果表明:每齿进给量对表面粗糙度的影响最大,其次是铣削深度,铣削速度的影响最小。较高的切削速度和较低的进给速度的交互作用对提高表面质量是有利的。     

用转捩模型预测转捩及确定最佳粗糙带高度

采用SST k-ω二方程湍流模型,附加γ-Reθ转捩模型对不同迎角下的NACA0012翼型绕流进行了转捩预测,计算预测的转捩位置与实验结果符合较好,说明γ-Reθ转捩模型对转捩位置具有较好的预测能力。进一步用模型对带有粗糙带的翼型进行转捩预测,获得了不同雷诺数下刚好激发转捩又不引起过大局部压力扰动和附加阻力的最低粗糙带高度,对固定转捩风洞实验有指导意义。     

微粒子喷丸技术研究进展

微粒子喷丸因其采用的弹丸介质尺寸小,具有强化基体表面并降低表面粗糙度的优点,已成为航空、能源动力等领域中一项重要的表面强化技术。目前对于该技术的研究仍处于对其强化机理的试验论证阶段,还未有完整的理论体系。对微粒子喷丸技术的原理和特点进行了综述,讨论了微粒子喷丸的强化机制,阐述了目前微粒子喷丸技术的研究现状及在各类材料中的应用,并指出了该技术的应用前景。研究各类参数对喷丸效果的影响将是微粒子喷丸发展的主要方向。